ورود/ثبت نام

وبسایت مهندسی الکترونیک و کامپیوتر

ترجمه مقاله Efficiency improvement of ARC less InGaP/GaAs DJ solar cell with InGaP tunnel junction and optimized two BSF layer in top and bottom cells

دسته بندی: لیزر و اپتیک ترجمه مقاله
ترجمه مقاله Efficiency improvement of ARC less InGaP/GaAs DJ solar cell with InGaP tunnel junction and optimized two BSF layer in top and bottom cells
Mohandes360.ir
6 4 1399

An optimized BSF (Back Surface Field) is a key layer for a multi junction or single junction solar cell. In this work, two BSF layers with different thicknesses have been used in the upper and the lower cell and simulations have been done using the Silvaco ATLAS numerical modelling tools. It has been also found that in under the current matching condition with thinner upper BSF layers (160 nm, 30 nm) and a thicker lower BSF layer (1000 nm, 30 nm), JSC short circuit current density and VOC open circuit voltage and conversion efficiency solar cell is improved. Major steps of simulation and its description and results have been compared to the previously published data in order to describe accuracy of the results. By selecting the best thickness of BSF layer, the efficiency can be increased up to 15% which happens because of increase in photo-generation rates and absorption in the solar cells. This article shows some characteristics of the proposed dual junction solar cell such as photo-generation rate, short circuit current density, open circuit voltage and efficiency of the device relative to thickness of BSF layers and change in materials of tunnel junction. The results show that in case of increase in thickness of BSF, efficiency is also increased. The highest efficiency is obtained in thickness of 160 nm, then the efficiency is decreased. The values of Jsc = 23.36 mA/cm2, Voc = 2.43 V, FF = 86.76% and η = 47.78% (1 sun) have also been obtained under AM1.5G illumination in the proposed structure which shows improvement in performance of the proposed device.
 

ادامه مطلب

نویسنده: حمیدرضا ارزبین

ترجمه مقاله Design and evaluation of ARC less InGaP/GaAs DJ solar cell with InGaP tunnel junction and optimized double top BSF layer

دسته بندی: لیزر و اپتیک ترجمه مقاله
ترجمه مقاله Design and evaluation of ARC less InGaP/GaAs DJ solar cell with InGaP tunnel junction and optimized double top BSF layer
Mohandes360.ir
6 4 1399

The presence and performance of the tunnel junction layer and back surface field (BSF) layers is the chief reason behind the high efficiency of the multi-junction solar cells. In this work, the focus is on thes election of a suitable material for the tunnel junction along with introducing a new top BSF layer. The simulation work is carried out in ATLAS TCAD. The various performance parameters like open circuit voltage (VOC), short circuit current density (JSC), fill factor (FF) and efficiency (n) are extracted from the proposed solar cell model and are compared with published results to ascertain the accuracy of the present work. Other parameters like the photogeneration rate, spectral response, potential developed,electric field are also determined. I–V curve and the power curve are also plotted for the proposed model.For this proposed structure VOC= 2.668 V, JSC= 18.2 mA/cm2, FF = 88.29% and EFF = 40.879% are obtained for 1000 suns illuminated under standard AM1.5G spectrum. The obtained outputs and the modeling steps are elaborately explained.
 

ادامه مطلب

نویسنده: حمیدرضا ارزبین

ترجمه مقاله Efficient InGaP/GaAs DJ solar cell with double back surface field layer

دسته بندی: ترجمه مقاله لیزر و اپتیک
ترجمه مقاله Efficient InGaP/GaAs DJ solar cell with double back surface field layer
Mohandes360.ir
6 4 1399

An effective and optimised BSF layer is an important layer in both single junction and multijunction solar cells. In this work the use of the double layer BSF for top cell with their varied thicknesses is investigated on GaInP/GaAs DJ solar cell using the computational numerical modelling TCAD tool Silvaco ATLAS. The detail photo-generation rates are determined. The major modelling stages are described and the simulation results are validated with published experimental data in order to describe the accuracy of our results produced. For this optimized cell structure, the maximum Jsc ¼ 17.33 mA/cm2, Voc ¼ 2.66 V, and fill factor (FF) ¼ 88.67% are obtained under AM1.5G illumination, exhibiting a maximum conversion efficiency of 34.52% (1 sun) and 39.15% (1000 suns).

ادامه مطلب

نویسنده: حمیدرضا ارزبین

قالب رزومه آماده (فرمت docx)

دسته بندی: طرح لایه باز
قالب رزومه آماده (فرمت docx)
Mohandes360.ir
5 4 1399

برای استخدام در یک شرکت باید یک نمونه رزومه کاری تهیه کنیم تا بتوانیم خود را به کارفرما معرفی کنیم. برای این کار نیازی نیست که همه چیز را از صفر طراحی کنیم و از ابتدا شروع به نوشتن رزومه کنیم. در این پست فرم خام یک رزومه بسیار قوی با ظاهری کاملاً زیبا و ساده در فرمت های Word وPDF برای کارجویان و متقاضیان استخدام در شرکت های مختلف ارائه شده است.

ادامه مطلب

نویسنده: حمیدرضا ارزبین

ترجمه مقاله A novel efficient double junction InGaP/GaAs solar cell using a thin carbon nano tube layer

دسته بندی: لیزر و اپتیک ترجمه مقاله
ترجمه مقاله A novel efficient double junction InGaP/GaAs solar cell using a thin carbon nano tube layer
Mohandes360.ir
5 4 1399

Abstract - Using the two dimensional device simulator Silvaco Atlas, the photovoltaic characteristics of a double junction InGaP/GaAs solar cell [J.P. Dutta, et al., Optik. Int. J. Light Electron Opt. (2016)], were numerically simulated. In this work, the performance of double junction InGaP/GaAs solar cell is modified by adding a thin Carbon Nano tubes film. It was predicted that by adding a 110 nm thin carbon nano tubes film on the surface of the cell, the efficiency would be modified and would increase from 40.879% to 41.95%. Finally, the performances of the cell before and after the addition of the CNT thin film were compared.
 

ادامه مطلب

نویسنده: حمیدرضا ارزبین